Default setup

ShuttlePro .pref files are included with your Vegas installation. You can use these files to configure the Contour ShuttlePro or ShuttlePro v2 for use with Vegas software. After you use the ShuttlePro Control Panel to import the appropriate .pref file from the Vegas application folder, the controls will behave as follows:

If you have version 2.5 or later of the Shuttle Pro driver, you can use the driver's Export Settings Info feature to create a graphical representation of your current settings.

Top Button Row
		Previous Marker Ctrl+Left Arrow	Previous Grid Division Page Up	Next Grid Division Page Down	Next Marker Ctrl+Right Arrow
Second Button Row
	Deselect All Ctrl+Shift+A	Select Event Start [	Exit Event Edit Numeric Keypad 5		Select Event End ]	Preview Cursor Numeric Keypad 0
Shuttle Ring
	Mark In (ShuttlePro v2 only)		Turn left or right for variable-speed playback			Mark Out (ShuttlePro v2 only)
Jog Dial			Jog/Edit Left F3	Jog/Edit Right F9
Bottom Button Row		Play/Pause Enter			Zoom In Up Arrow
		Play/Stop Spacebar			Zoom Out Down Arrow

 

ShuttleXpress .pref files are included with your Vegas installation. You can use these files to configure the Contour ShuttleXpress for use with Vegas software. After you use the ShuttleXpress Control Panel to import the appropriate .pref file from the Vegas application folder, the controls will behave as follows:

If you have version 2.5 or later of the ShuttleXpress driver, you can use the driver's Export Settings Info feature to create a graphical representation of your current settings.

Buttons	Play/Pause Enter	Select Event Start [	Exit Event Edit Numeric Keypad 5		Select Event End ]	Preview Cursor Numeric Keypad 0
Shuttle Ring
			Turn left or right for variable-speed playback
Jog Dial			Jog/Edit Left F3	Jog/Edit Right F9

Use shuttle ring and jog dial to navigate the timeline. If you're using a ShuttlePro, you can also use the buttons in the top and bottom rows to navigate.

You can set the speed of the shuttle ring using the JKL / shuttle speed drop-down list on the Editing tab of the Preferences dialog.

If you have a multimedia controller such as the Griffin Technology PowerMate, you can map your controller to the F3/F9 jog/edit keys

Map the single-button function to the Enter key for Play/Pause functionality. When paused, the knob will jog by frame.

When you use the [ or ] keys to enter event edge-trimming mode, the knob will trim the event:

• Turn the knob left or right to trim the selected event edge:

• Hold Alt while turning the knob to perform a slip trim.

• Hold Ctrl while turning the knob to change the event's playback rate.

• Hold Ctrl+Alt while turning the knob to perform an adjacent trim.

During playback, the knob will function as a variable-speed shuttle control. You can set the speed of the shuttle control using the JKL / shuttle speed drop-down list on the Editing tab of the Preferences dialog.

You can use the second row of buttons and the jog dial to make the keyboard-based event edge-trimming method even better.

1. If you want downstream events to ripple as you trim, click the Auto Ripple button to turn on Auto Ripple mode.

2. Press the Deselect All button on the ShuttlePro to deselect all events.

3. Select a track and position the edit cursor over the event you want to edit.

4. Press the Select Event Start or Select Event End buttons and move to the edge you'd like to edit. A red bracket is displayed in the timeline to indicate which event edge will be trimmed.

5. Edit to your heart's content:

6. Turn the jog dial left or right to trim the selected event edge:

7. Hold Alt while turning the jog dial to perform a slip trim.

8. Hold Ctrl while turning the jog dial to change the event's playback rate.

9. Hold Ctrl+Alt while turning the jog dial to perform an adjacent trim.